Rollers Service In Kingwood By Servo Garage Door Repair
The Importance of Garage Door Rollers
There are many different parts that make up your garage door, which allow it to perform properly. Every single one of these are crucial to making sure that the garage door can open and close properly day in and day out, until, of course, it is time to replace these parts. If you are using an overhead sectional garage door, one of the more underappreciated parts of your garage door are the rollers. The garage door of a typical home can have anywhere between 8 and 12 rollers, depending on the size of the door. Commercial garage doors could have more. The rollers are made up of metal stems with wheels on one end. Depending on the type of roller, the wheel can either be covered in plastic, steel, or nylon. Some rollers require ball bearings, while some operate without them. These rollers have the rather important task of keeping the garage door panels on the track. They do this because their stems are inserted into holes along the skeleton of the garage door, while their wheels are on the aforementioned track. Without these, your garage door would just be an utter mess and would likely damage your car. Unless you are using a different type of garage door, like roller garage doors, these rollers are pretty much responsible for the movement of your garage door, so you owe them a lot in terms of the overall functionality of your garage doors. This is why it is crucial that you properly maintain them and make sure you replace them if ever they are in need of replacement.
Choosing Your Rollers
Oftentimes, when you buy a garage door set, all the parts, including garage door rollers, are already present and there is no need to pick specific parts. However, there could be a benefit to knowing which kind of roller you end up getting. In fact, in some instances, it may be worth spending the extra buck to buy rollers in addition to the ones that come with the garage door you bought. First thing you need to make sure of is the size of your tracks, as well as the size of the holes that the stems of the rollers should pass through. While the rollers are not supposed to fit snugly, it is possible to buy the wrong size, so make sure that you do not. Another thing you need to consider is the material of the wheel covering of the roller. Garage doors usually come with plastic wheels, as these are the cheapest. However, these have the shortest life span. If you have the extra funds, you should consider opting for steel or nylon covered rollers, as these offer better protection for the wheels. You should also know if your rollers have ball bearings or not. Those with ball bearings can often survive several thousand cycles—defined as an opening and closing of the garage door—more than those without ball bearings. This is why getting one with ball bearings is often worth the extra cost.
Maintaining and Replacing Your Rollers
Making sure your rollers are well-maintained is extremely important to ensuring that you get the longest lifespan out of your garage door. As with all garage doors, you need to personally inspect the garage door once a month, while it would also be prudent to have a professional inspect it once or twice a year. The best way to maintain your rollers, and the rest of the mechanism for that matter, would be to limit its cycles. This means making sure your garage door is not needlessly opened and closed. But using the garage door is inevitable, so you need to do more to maintain it. For garage door rollers with ball bearings, you will need to lubricate them at least once a year. During your inspections, you should also be sure to notice signs of wear and tear. Once you have determined that your rollers are already too damaged, it is time to replace them. To do that, you will have to create a slot in the track, but bending the metal in order for the rollers to get out. Then, you can simply move the garage door to slide the rollers along the track, allowing you to take out and replace each roller. Make sure to bend the track back when you are done. The top-most rollers will need to be replaced by bending the track slightly in order to remove the roller and replace it.
Professional Assistance for Your Garage Door Rollers
If replacing your rollers seems like a bit too big of a task for you, then you should not force yourself to take it on. It would be prudent to seek professional assistance, so that you can make sure that you do not cause a bigger problem. If you want, you can observe the first time the rollers are replaced so that you can do it yourself next time. You might also want to get assistance in choosing rollers in the first place. For these and other garage door concerns, you should contact us at Garage Door Repair Kingwood. If you are in the Kingwood, Texas area, then you can call us for all your garage door services, whether you are dealing with overhead sectional garage doors or roller garage doors, you can be sure that we can help you. We are open 24/7, so you can be sure that, whenever you need us, we will be there for you. Whether you need help with installment, maintenance, replacement, or repair, we are at your disposal. Our professionals have years of expert experience that ensures that your garage door is in the best hands. If you need information about garage doors, simply give us a call, and we can help you out. You can make each appointment an educational experience and learn from our experts about ways to detect problems and maintain garage door parts.